Fire Apparatus Model Forums

Re: So This Happened!!

2020-08-18T21:48:52

Charlie,

Thanks for the pick me up. I guess the good thing with modeling is you can replace it if needed. Half of the 1/43 scale models made it through unscathed. The only one that can't be replaced is a custom i got a long time ago. It really only has a chip on the nose. I may just leave and not repair.

The 1/64 models I made on the other hand are a basket case of parts. Some I can repair but others I will just find the bodies and make a new one. I may even be able to make them better this time. It is just 20 or so mode to add to the to do list.

Jeff

Statistics: Posted by Sirentoys — Tue Aug 18, 2020 9:48 pm

Re: So This Happened!!

2020-08-18T18:48:57

Had a similar thing happen although it was not with something coming off the wall. It was an award plaque slipping and hitting my '37 Seagrave tillered aerial and sending it to the floor! It was like watching something in slo motion and not being able to do anything about it. So I did just what you did. Shut off the light and went upstairs. When I finally got enough courage and go back and look I was able to find all of the pieces and over time put it all back together again.
Do the same. Let things slide for a while and then one at a time put all the pieces back together. It can be done.

Statistics: Posted by Chariots of Fire — Tue Aug 18, 2020 6:48 pm

Re: So This Happened!!

2020-08-18T01:54:29

So sorry for the damage to your PA model collection. Know some of those will be hard to replace. A long time ago I learned not to trust those adhesive stripes. Wishing you the best in repairing and replacing.

Statistics: Posted by pjsparky — Tue Aug 18, 2020 1:54 am

Re: So This Happened!!

2020-08-08T15:49:53

Nooooo... That‘s why I never trust those adhesive stripes, especially with such „precious“ load on. Allthough I hate to drill holes into walls, screws are still the most reliable choice for me!

Statistics: Posted by Hazmat — Sat Aug 08, 2020 3:49 pm

Re: So This Happened!!

2020-08-02T16:46:07

That's no fun! I'm sorry to see that!

Statistics: Posted by CCFR-45 — Sun Aug 02, 2020 4:46 pm

Re: So This Happened!!

2020-08-02T04:47:42

Rich wrote: ↑
Sat Aug 01, 2020 5:20 pm
Well, you should have plenty of decals to fix stuff!! Still sucks though.

Yes I do.

I think the sand box scale ones will be duplicated and not repaired. The PSP Trooper only cars, well that is going to be tough to replace some like the Charger.

Statistics: Posted by Sirentoys — Sun Aug 02, 2020 4:47 am

Re: So This Happened!!

2020-08-02T04:40:11

Brian49 wrote: ↑
Sat Aug 01, 2020 11:38 am
That sucks, sorry to hear?

In hopes others can avoid such a problem how was it attached to the wall? I usually use 3” screws to hold my cases up.

IN the end it is my own fault. Because I paid A LOT of money to have the walls finished, I didn't use the screws into studs I had done in previous residences/displays. So i used heavy duty adhesive fasteners. You can see some still on the case. I almost removed it early this summer to replace with an Ikea cabinet because it was getting full and the 1/43 don't let the door close and latch. But decided to wait. DOH.

Statistics: Posted by Sirentoys — Sun Aug 02, 2020 4:40 am

Re: So This Happened!!

2020-08-01T17:20:02

Well, you should have plenty of decals to fix stuff!! Still sucks though.

Statistics: Posted by Rich — Sat Aug 01, 2020 5:20 pm

Re: So This Happened!!

2020-08-01T15:29:15

I concur- That SUCKS! We had a similar thing happen while we were on vacation a few years ago. Two 8 foot shelves of assembled LEGOs star wars ships had collapsed onto a shelf of Hess Trucks which then collapsed onto an HO train layout. All I could do was stare for a long while then I walked out, shut the door and didn't go back in the room for over a week. Still piecing the LEGOs back together after almost 4 years.

Statistics: Posted by rastuman — Sat Aug 01, 2020 3:29 pm

Re: So This Happened!!

2020-08-01T11:38:08

That sucks, sorry to hear?

In hopes others can avoid such a problem how was it attached to the wall? I usually use 3” screws to hold my cases up.

Statistics: Posted by Brian49 — Sat Aug 01, 2020 11:38 am

So This Happened!!

2020-08-01T04:09:03

A couple weeks ago gravity proved it was a law. My display of PA State Police Cars and Customs fell off the wall. Most of the models suffered some damage. Other were simply destroyed. Every custom had some sort of damage. I am gutted. I haven't done any modeling since. Replacing the PSP models will be costly and take some time.

Statistics: Posted by Sirentoys — Sat Aug 01, 2020 4:09 am