Page 1 of 1

Fire Replicas Haz-Mat

Posted: Sun Oct 07, 2018 7:03 pm
by JoeO
The Fire Replicas Squad 7 required removing decals. Using Micro Set and a micro brush, finger nail, and toothpicks I removed all of the CFD markings. Gently rubbing to not scratch the paint, the process is long because you want to go slow if you get impatient you will scratch the paint.

Once all the decals are off i used a few tips and wax to get rid of any small scuffs and water marks. The red stripes are from InQuarters Washington DC sheet, the Haz-Mat placards are from FD1 InQuarters sheet, I believe the Haz-Mat 1 is all from the Vegas sheet. The Maltese cross is from Micro Scale. The Lawerence Decals are all a custom run from InQuarters. These are 1/64th scale I used on Code 3’s you see how they fit perfectly on Fire Replicas. Now I have a Haz-Mat to go with the L/A truck.

Re: Fire Replicas Haz-Mat

Posted: Tue Oct 09, 2018 5:45 pm
by firebuff123
Wow Joe, another masterpiece.

Re: Fire Replicas Haz-Mat

Posted: Tue Oct 09, 2018 8:16 pm
by Sirentoys
Again you knocked it out of the park.

A perfect pair.

Re: Fire Replicas Haz-Mat

Posted: Wed Oct 10, 2018 2:02 am
by M1968Q
Very nice as always Joe!

Re: Fire Replicas Haz-Mat

Posted: Wed Oct 10, 2018 3:23 pm
by CCFR-45
Fantastic work!

Thank you for sharing