1:32 FDNY Seagrave Towerladder in progress

Post by **Hazmat** » Mon Nov 19, 2018 12:32 am

followed by creating the parts on the underside of the telescope boom segments (no idea what their function is or what they´re called

)

: 07082018 (22) (Large).JPG (289.13 KiB) Viewed 9675 times

: 07082018 (23) (Large).JPG (267.79 KiB) Viewed 9675 times

: 07082018 (24) (Large).JPG (263.31 KiB) Viewed 9675 times

: 07082018 (25) (Large).JPG (266.9 KiB) Viewed 9675 times

: 07082018 (26) (Large).JPG (271.93 KiB) Viewed 9675 times

: 07082018 (27) (Large).JPG (253.91 KiB) Viewed 9675 times

Post by **Hazmat** » Mon Nov 19, 2018 12:46 am

..the finished pieces, placed onto the boom

: 16092018 (58) (Large).JPG (246.92 KiB) Viewed 9675 times

: 16092018 (81) (Large).JPG (251.52 KiB) Viewed 9675 times

the next small things were the the scene light for the basket..

: 19092018 (2) (Large).JPG (254.87 KiB) Viewed 9675 times

: 19092018 (5) (Large).JPG (292.3 KiB) Viewed 9675 times

: 19112018 (50) (Large).JPG (229.83 KiB) Viewed 9675 times

...and the support/strut for the telescope boom (not showing every step since it basically was just 2mm styrene stripes put in a rectangular shape,bent, done)

: 07082018 (2) (Large).JPG (268.75 KiB) Viewed 9675 times

Post by **Hazmat** » Mon Nov 19, 2018 1:06 am

so the next, a little more complex, part was the further completion of the basket pipe system.
Since i want to have it moveable it was a bit tricky to get the right angle to have the pipe tilting properly (ok still not 100% accurat, but fine for me

)

: 07082018 (16) (Large).JPG (200.46 KiB) Viewed 9675 times

followed by some further details for the basket like the scene light boom (out of a 1,5mm round styrene rod and l-shape leftovers) and the small ladder on the back of the basket.

: 07082018 (14) (Large).JPG (233.57 KiB) Viewed 9675 times

: 16092018 (54) (Large).JPG (241.5 KiB) Viewed 9675 times

with this done, the first paintcoat for the extendable boom segments, the ladders and the basket followed

: 16092018 (74) (Large).JPG (315.41 KiB) Viewed 9675 times

: 16092018 (74)_2 (Large).jpg (234.6 KiB) Viewed 9675 times

Post by **Hazmat** » Mon Nov 19, 2018 1:28 am

With this done, i continued to add the rubber shock absorbers, out of 1mm black styrene sheets, to the bottom and the grating of the basket. I further drilled small holes into the shock absorbers to imitate the attachment bolts.

: 16092018 (76) (Large).JPG (238.73 KiB) Viewed 9675 times

: 16092018 (80) (Large).JPG (284.52 KiB) Viewed 9675 times

: 19112018 (43) (Large).JPG (225.92 KiB) Viewed 9675 times

once this was done, i´ve made some "movement tests" with the pipe system.
(Not following my own advise

) being not 100% satisfied, i tried to adjust the angle of the connection between the moving and the static part; big mistake

: 19092018 (19) (Large).JPG (202.27 KiB) Viewed 9675 times

Of course the static part broke off; so i´ve had to remake another one, which still doesn´t work 100% accurate, but i leave it as it is now

So the last pictures of the basket shows the part pretty much the way it will stay on the truck (of course with added decals and some more paint at the end)

: 19112018_1 (7) (Large).JPG (230.36 KiB) Viewed 9675 times

: 19112018_1 (10) (Large).JPG (236.63 KiB) Viewed 9675 times

Post by **Hazmat** » Mon Nov 19, 2018 1:43 am

The last part for this update are the cable drums, which are placed on the sides of the telescope boom.
These were made out of plastic cotton reels, rectangular evergreen pieces, u-shape polysterol rods and round rods/tubes in different diameters.

: 19112018 (32) (Large).JPG (282.99 KiB) Viewed 9674 times

: 19112018 (38) (Large).JPG (266.66 KiB) Viewed 9674 times

: 19112018 (25) (Large).JPG (273.18 KiB) Viewed 9674 times

: 19112018 (34) (Large).JPG (282.85 KiB) Viewed 9674 times

: 19112018 (30) (Large).JPG (252.27 KiB) Viewed 9674 times

: 19112018 (18) (Large).JPG (261.68 KiB) Viewed 9674 times

Post by **Hazmat** » Mon Nov 19, 2018 1:51 am

The last pictures for this update showing the cable drums roughly in place on the boom and an overview of the current status of the whole rig, hope you enjoyed it

: 19112018 (7) (Large).JPG (212.8 KiB) Viewed 9673 times

: 19112018 (13) (Large).JPG (217.89 KiB) Viewed 9673 times

: 19112018 (2) (Large).JPG (383.13 KiB) Viewed 9673 times

: 19112018 (4) (Large).JPG (347.12 KiB) Viewed 9673 times

: 19112018 (16) (Large).JPG (320.98 KiB) Viewed 9673 times

: 19112018 (17) (Large).JPG (356.76 KiB) Viewed 9673 times

Post by **CCFR-45** » Mon Nov 19, 2018 3:55 am

Coming along really nicely!

Thanks for sharing

Post by **Dfdeng44** » Sun Dec 02, 2018 7:02 am

Nice.

Post by **Hazmat** » Tue Jul 02, 2019 11:21 am

Hi everbody, yes this build continues

since my last post i left the truck aside for a while, but i picked it up the last three months and was rather building than posting something

But now a little progress with the making of the boom control panel on the turntable.

I therefore used some remainings of the diamondplate pieces of the 10 truck as well as some thin wire and a clear yellow plastic sheet as worklight cover.