Building progress 1:43 FDNY Haztac

Post by **Hazmat** » Mon Sep 21, 2020 2:05 pm

Hi again,

after the NYPD ESU truck I show you the building steps to my FDNY unit

Given the rather simple shape and fewer details, compared to the ESU unit, i thought this would be an easier and faster build, ah.. well.. no

So this one also started by cutting the cab and chassis to the correct size.

: FDNY_HAZTAC_Ford (1) (Large).JPG (209.08 KiB) Viewed 4811 times

: FDNY_HAZTAC_Ford (4) (Large).JPG (214.07 KiB) Viewed 4811 times

: FDNY_HAZTAC_Ford (5) (Large).JPG (262.36 KiB) Viewed 4811 times

: FDNY_HAZTAC_Ford (7) (Large).JPG (251.2 KiB) Viewed 4811 times

: FDNY_HAZTAC_Ford (13) (Large).JPG (213.38 KiB) Viewed 4811 times

Post by **Hazmat** » Mon Sep 21, 2020 2:08 pm

followed by the cardboard mockup and the 1mm styrene version as the cardboard dimensions were were right

: FDNY_HAZTAC_Ford (16) (Large).JPG (221.02 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (18) (Large).JPG (198.42 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (20) (Large).JPG (257.46 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (21) (Large).JPG (240.41 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (24) (Large).JPG (221.54 KiB) Viewed 4810 times

Post by **Hazmat** » Mon Sep 21, 2020 2:16 pm

Next were the compartment doors with the slam locks + the tires got replaced as well.

: FDNY_HAZTAC_Ford (26) (Large).JPG (270.22 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (27) (Large).JPG (190.66 KiB) Viewed 4810 times

: FDNY_HAZTAC_Ford (38) (Large).JPG (165.38 KiB) Viewed 4810 times

and i started the construction of the rear bumper + some more details to the rear section

: FDNY_HAZTAC_FORD1 (2) (Large).JPG (270.66 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD1 (14) (Large).JPG (243.59 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD1 (15) (Large).JPG (222.85 KiB) Viewed 4810 times

that concluded the main bodywork and painting followed.
That´s when the troubles with this build started

Post by **Hazmat** » Mon Sep 21, 2020 2:32 pm

The next pictures you see, were allready the THIRD attempt of the paintcoat

The strange thing was that as long as the paint wasn´t dry it looked ok

Anyway so with the third coat on, i again noticed the unpretty surface and wanted to remove all the paint again.
I later figured out that my airbrush compressor didn´t work properly so i had to much pressure which resulted in a very poor, "sandish" paintcoat

.
Since my thinner got emtpy meanwhile I went to my "storage" and surprisingly found a Tamiya spray can, that I obviously forgot.
Hm....waiting for the new parts for my airbrush, or simply sand the surface and paint over it with the can?? (both paints were Tamiya anyway).
I choosed the second option and apparently it worked out.

With this done i also changed the mirrors, like on the ESU truck.

: FDNY_HAZTAC_FORD1 (17) (Large).JPG (166.41 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD1 (20) (Large).JPG (218.26 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD1 (29) (Large).JPG (192.84 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD1 (42) (Large).JPG (257.35 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD2 (10) (Large).JPG (195.78 KiB) Viewed 4810 times

Post by **Hazmat** » Mon Sep 21, 2020 2:59 pm

As you´ve seen on the last picture I originally wanted to use the FRR Whelen Edge lightbars, but they were simply to small for the cab.
So I decided to make my own lightbar out of a clear, rectangular plastic tube, a 0,75 mm black PS piece as interior and a very small, corrugated PS siding as top of the lightbar.

: FDNY_HAZTAC_FORD1 (34) (Large).JPG (224.47 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD2 (19) (Large).JPG (264.53 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD2 (52) (Large).JPG (198.4 KiB) Viewed 4810 times

...the dimensions look better now

: FDNY_HAZTAC_FORD2 (15) (Large).JPG (202.66 KiB) Viewed 4810 times

With this done, I started to make the markings for this model. And there my problems continued...

All the small letters and the graphics were printed on clear and white waterslide sheets, exept for the big FDNY letters, which I wanted to cut out of reflective foil.

: FDNY_HAZTAC_FORD2 (26) (Large).JPG (249.14 KiB) Viewed 4810 times

: FDNY_HAZTAC_FORD2 (28) (Large).JPG (248.94 KiB) Viewed 4810 times

The, mostly straight, rear letters were easy to cut, but this time I had so much difficulties with the curved side letters that after the fifth unseccesfull attempt, I decided to print them out as well!!
Beeing easier said then done, for whatever reason now my printer drove me nuts

I used the same paper, same colour but after 6 wasted decal sheets I still hadn´t one useable printout???

At this point I took a step back, calmed down and left this build aside!
Since I also had the NYPD unit on my bench, I continued on that one

Post by **Hazmat** » Mon Sep 21, 2020 3:16 pm

But this set back later turned out as a sort of "stroke of luck"

A few days later i noticed that the paintcoat had small little cracks all over

Obviously my genious idea with the spray can was a very very bad one

And if I would´ve allready all the graphics on, I for sure would´ve thrown the whole model in the bin!!!
So for the fourth time i removed the whole paint and painted this model only with the spray can