Fire Replicas Seagrave Demo

Showcase and discuss all fire related models, stations, dioramas.
Post Reply
JoeO
Posts: 591
Joined: Wed Dec 27, 2017 9:58 pm

Fire Replicas Seagrave Demo

Post by JoeO » Mon Oct 29, 2018 1:25 pm

The new Seagrave Demo has made it to the table. Here's the simple steps to make your own truck.

1. The truck has the Seagrave logo on both doors and above the rear compartments. The Seagrave flame is on the rear doors, above the compartments, and on the rear roll up door.
2. Tools: Micro set helps loosen the decal from the truck, toothpick, brush to apply Micro set, tape to pick up decals fragments, and a good finger nail.
3. I brush the micro set on and over the decal for a few minutes. In the case with my finger nail I was able to remove all decals by simply scraping my finger nail, with the exception of the rear roll up need toothpick for that.
Using tape as i go along to pick up the little scraps of decal, if you don't it will just dry on wherever it lands.

In 20 minutes the truck is now ready for new decals, again you can get creative with your new departments name. This link can take you to the best generic decals to put on it.
http://www.inquarters.com/Fire_Decals.html

Here's the link to the demo truck if you have not ordered one. https://www.firereplicas.com/shop-by-oem/seagrave/
Attachments
IMG_4812.jpeg
IMG_4812.jpeg (71.87 KiB) Viewed 3956 times
IMG_4813.jpeg
IMG_4813.jpeg (79.96 KiB) Viewed 3956 times
IMG_4814.jpeg
IMG_4814.jpeg (68.9 KiB) Viewed 3956 times
IMG_4815.jpeg
IMG_4815.jpeg (74.41 KiB) Viewed 3956 times
IMG_4816.jpeg
IMG_4816.jpeg (61.78 KiB) Viewed 3956 times

JoeO
Posts: 591
Joined: Wed Dec 27, 2017 9:58 pm

Re: Fire Replicas Seagrave Demo

Post by JoeO » Sat Nov 03, 2018 6:45 pm

Using Rich's Columbus sheet with some of his custom sheets for the front door finished this off.
Attachments
IMG_4863.jpg
IMG_4863.jpg (106.93 KiB) Viewed 3778 times
IMG_4864.jpg
IMG_4864.jpg (119.52 KiB) Viewed 3778 times
IMG_4866.jpg
IMG_4866.jpg (125.98 KiB) Viewed 3778 times
IMG_4884.jpg
IMG_4884.jpg (144.65 KiB) Viewed 3778 times
IMG_4885.jpg
IMG_4885.jpg (132.85 KiB) Viewed 3778 times

JoeO
Posts: 591
Joined: Wed Dec 27, 2017 9:58 pm

Re: Fire Replicas Seagrave Demo

Post by JoeO » Mon Nov 12, 2018 6:50 pm

Here's another version of the Seagrave Demo lettered one letter at a time with InQuarters decals.
Attachments
IMG_4860.jpg
IMG_4860.jpg (323.39 KiB) Viewed 3701 times
IMG_4859.jpg
IMG_4859.jpg (606.55 KiB) Viewed 3701 times
IMG_4858.jpg
IMG_4858.jpg (590.53 KiB) Viewed 3701 times
IMG_4857.jpg
IMG_4857.jpg (697.8 KiB) Viewed 3701 times
IMG_4856.jpg
IMG_4856.jpg (528.82 KiB) Viewed 3701 times
IMG_4855.jpg
IMG_4855.jpg (443.86 KiB) Viewed 3701 times

Rich
Site Admin
Posts: 375
Joined: Tue Dec 26, 2017 11:24 pm

Re: Fire Replicas Seagrave Demo

Post by Rich » Mon Nov 12, 2018 8:36 pm

Nice build Joe. And an interesting name.
Administrator

JoeO
Posts: 591
Joined: Wed Dec 27, 2017 9:58 pm

Re: Fire Replicas Seagrave Demo

Post by JoeO » Tue Nov 13, 2018 2:04 am

Rich wrote:
Mon Nov 12, 2018 8:36 pm
Nice build Joe. And an interesting name.
Thanks, it's a real place in West Virginia, here's how it got it's name "Casper Bunner, age 20, son of Reuben Adam Bunner, arrived at the port of Philadelphia on 5/12/1740 on the ship Loyal Judith. He was born in the Rheinland Pfalz, the Palatinate, also lived in Mannheim before coming to America. Casper received a land grant of 400 acres in the Monongahela River Valley area. Part of this is now called Bunner's Ridge located in West Virginia." BTW it's just south west of "Kincaid Knob"

User avatar
CCFR-45
Posts: 573
Joined: Thu Dec 28, 2017 12:11 am

Re: Fire Replicas Seagrave Demo

Post by CCFR-45 » Wed Nov 14, 2018 4:18 pm

Joe, I'm going to send you a PM.

Great looking Truck.
Steven

Check Out My Photography Website Full of Police, Fire, And Aviation Pictures.
www.bluefireflight.com

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests